Insulation
Spray foam, blown-in and attic work, priced by the square foot, with every published total checked against the rate it was built from.
This section opened on 15 November 2026. It works the way the rest of the site does: every figure names the guide it came from and the date that guide was updated, and where sources disagree we show the disagreement instead of splitting the difference.
One thing runs through all three pages and is worth saying at the front. Insulation is sold by the square foot, and almost every published total is that rate multiplied by an area somebody else assumed. Once you know your own area and your material, the totals stop being useful and the rate starts being enough.
The questions so far
| Page | The short answer | What it adds |
|---|---|---|
| Spray foam insulation cost | $1 to $4.50 per square foot by one guide, $3.15 to $7.50 by the other | the clearest borrowed-numbers case we have found: one guide names the other, and its worked house figures are the other's four rates times 1,500, to the dollar |
| Attic insulation cost | $0.30 to $12 per square foot depending on the material | a 40-fold spread inside one job, plus the removal cost that published rates leave out |
| Blown-in insulation cost | $0.50 to $2.30 per square foot | the same publisher prints two different rates for this material on two of its own pages, and its material table shows which is which |
| Crawl space insulation cost | $2,000 to insulate, $5,500 to encapsulate | two different jobs routinely quoted as one, and the vapor barrier is what tells them apart |
What we found doing this
The provenance question got a clean answer here. Across this site we keep finding two guides printing figures that trace to one upstream, and usually the best we can do is note the coincidence. On the spray foam page we could do better: This Old House states in a footnote that its data comes from HomeGuide, HomeAdvisor and Fixr, and its worked figures for a 1,500 square foot house reproduce Fixr's four per-square-foot rates multiplied by 1,500 exactly, four times out of four. That is not a resemblance, it is a derivation.
And the multiplication habit is everywhere in this subject. Fixr's blown-in area table is its rate times the area in every row, with no quantity discount. This Old House's spray foam area table is the same for two rows out of three, and the third row does not follow its own headline rate. We say so on each page, because a table built that way looks like evidence and is not.
Where the numbers come from
Three publishers carry this section. This Old House names its upstream on every page it supplies here, HomeGuide, HomeAdvisor and Fixr on spray foam, and contractor estimates used by Angi on the attic page. Bob Vila names Angi and HomeAdvisor on spray foam and lists HomeAdvisor, Angi, HomeGuide and Fixr as its article sources. Fixr names pricing databases, licensed contractors and industry experts, and no individual publisher.
That makes one comparison on the blown-in page worth more than it looks: where the Angi-derived This Old House figure and Fixr's general page agree closely by different routes, and Fixr's own dedicated page sits above both, the two that agree are the better guide.
What connects this to the rest of the site
Insulation and moisture are the same conversation from two directions. Our foundations section covers water reaching a crawl space or basement, which is where insulation most often fails, and our heating and cooling section covers the equipment whose running cost insulation is meant to reduce.
Questions answered
- How much does attic insulation cost?Updated 2026-11-15This Old House (updated July 10, 2025) prices attic insulation by material, from fiberglass batts at $0.30 to $1.50 per square foot up to structural insulated panels at $7 to $12, with its data sourced from contractor estimates used by Angi. Fixr (updated January 29, 2026) gives attic insulation at $0.50 to $2.30 per square foot. The choice of material moves the price more than anything else, and removing the old insulation first adds $1 to $2 per square foot.
- How much does blown-in insulation cost?Updated 2026-11-15Fixr's dedicated guide (updated August 29, 2025) puts blown-in insulation at $3,000 to $7,000 with an average of $5,000, and gives a rate of $1.65 to $3.80 per square foot. Its own general insulation page (updated January 29, 2026) says blown-in costs $0.50 to $2.30 per square foot. This Old House (updated July 10, 2025) puts blown-in cellulose at $0.60 to $2.30, sourced from contractor estimates used by Angi. The material rates reconcile them: fiberglass and wet spray cellulose are cheap, rockwool and dense pack cellulose are not.
- How much does crawl space insulation cost?Updated 2026-11-16Fixr (updated August 29, 2025) puts crawl space insulation at $500 to $6,000 with a national average of $2,000, stated for spray foam in an 800 square foot crawl space. This Old House (updated March 13, 2026) prices the materials for the same space, fiberglass batt at $0.60 to $1.10 per square foot, spray foam at $1 to $3.50 and rigid foam board at $2.50 to $3. Its own page is about encapsulation, which is a larger job at $3 to $7 per square foot, and the two are often quoted together without being separated.
- How much does spray foam insulation cost?Updated 2026-11-15This Old House (updated November 12, 2026) puts spray foam at $1 to $4.50 per square foot. Fixr (updated January 31, 2025) gives $3.15 to $7.50 per square foot for an existing home and $2.75 to $6.50 for new construction, with a whole-home average of $20,000. Bob Vila (updated June 11, 2024) gives $1,409 to $4,145 with an average of $2,756, from Angi and HomeAdvisor. The two are not independent: This Old House names Fixr among its sources, and its worked figures for a 1,500 square foot house are Fixr's four rates multiplied by 1,500, to the dollar. Use the per square foot rate and your own area.