HonestHomeCost
Insulation

How much does attic insulation cost?

Short answer

This Old House (updated July 10, 2025) prices attic insulation by material, from fiberglass batts at $0.30 to $1.50 per square foot up to structural insulated panels at $7 to $12, with its data sourced from contractor estimates used by Angi. Fixr (updated January 29, 2026) gives attic insulation at $0.50 to $2.30 per square foot. The choice of material moves the price more than anything else, and removing the old insulation first adds $1 to $2 per square foot.

$0.30 to $1.50 per sq ft
Fiberglass batts, the cheapest option (This Old House)
$0.50 to $2.30 per sq ft
Attic insulation generally (Fixr)
$1 to $2 per sq ft
Removing the old insulation, on top of the new (This Old House)
30% up to $1,200
Federal tax credit on materials, not labour, through December 31, 2032 (This Old House)

The material is the decision

Material Cost per square foot Source
Fiberglass batts $0.30 to $1.50 This Old House
Blown-in cellulose $0.60 to $2.30 This Old House
Spray foam $1 to $4.50 This Old House
Structural insulated panels $7 to $12 This Old House
Attic insulation, unspecified $0.50 to $2.30 Fixr

Our arithmetic, marked as ours. From the bottom of fiberglass to the top of structural panels is $0.30 to $12, a factor of 40. Nothing else on this page matters as much as which row you are in.

Fixr's single figure of $0.50 to $2.30 does not try to separate materials. Set against the This Old House rows, it brackets blown-in cellulose almost exactly and sits below spray foam entirely.

Our reading. Most attic jobs are the first two rows. Structural insulated panels are a renovation, not an insulation job: This Old House says they suit new construction and may require significant renovation to fit into an existing space, which is why the figure looks out of place next to the others.

The two guides on blown-in are close but not the same

Figure This Old House Fixr
Blown-in $0.60 to $2.30 $0.50 to $2.30

The tops are identical and the floors are $0.10 apart, which is our arithmetic.

Our reading. On this site we treat identical figures as a reason to look for a shared upstream, and here the attribution lines up with the small difference rather than against it: This Old House says its cost data comes from contractor estimates used by Angi, and Fixr names pricing databases, licensed contractors and industry experts. Two routes landing within ten cents at one end and on the dollar at the other is about as close as genuinely separate estimates get. Our blown-in page works through that material on its own.

What the published rates leave out

Removal. This Old House puts taking out the existing insulation at $1 to $2 per square foot, on top of the cost to install the new insulation. On a fiberglass job at $0.30 to $1.50 that can more than double the bill, and it is the single most common omission between a published rate and a real quote.

R-value, which is what you are actually buying. This Old House gives spray foam at R-6 to R-8 for closed cell and R-3.6 to R-4.3 for open cell, and structural panels at R-8.0 and up. A cheaper material at a lower R-value is not cheaper per unit of insulation, and comparing dollars per square foot between materials without their R-values is comparing two different quantities.

The tax credit, and why it is smaller than it sounds

This Old House sets out the federal position: a credit of up to 30% of the insulation cost, materials and not labour, capped at $1,200, running through December 31, 2032. Air sealing products with a Manufacturer's Certification Statement may also qualify. It notes that many states offer their own energy credits as well.

Our view, marked as ours, and it follows from the figures above rather than from the publisher. The credit covers materials only, and on insulation work the labour is a large share of the bill. So the headline 30% applies to a fraction of what you pay, and the $1,200 cap binds well before most whole-attic projects reach it. It is worth claiming and it is not a reason to choose a more expensive material.

How to price an attic

Our view, marked as ours.

  • Measure the attic floor area. Every figure on this page is per square foot, and the area is the only input you control.
  • Pick the material before comparing quotes. The spread between rows is 40 times; the spread between contractors inside a row is not.
  • Ask whether removal is included. At $1 to $2 per square foot it can exceed the new insulation.
  • Compare R-values, not just prices. The cheap rows are cheap partly because they insulate less per inch.
  • If the quote is for spray foam, our spray foam page explains why its published rates differ by a factor of twenty and why one guide's house figures are the other's rates multiplied.
  • Below the living space the job changes name. Our crawl space page separates insulating from encapsulating, which are routinely quoted as one.

What to take from this

  1. $0.30 to $12 per square foot covers the four materials, so the material is the decision.
  2. Fixr's $0.50 to $2.30 brackets blown-in cellulose and sits below spray foam.
  3. Removal adds $1 to $2 per square foot and is usually missing from published rates.
  4. The tax credit is 30% of materials only, capped at $1,200 through 2032.
  5. Structural panels at $7 to $12 are a renovation, not an insulation job.

Sources

  1. This Old House, Adding Insulation to Attic, updated July 10, 2025 (the per square foot figures for blown-in cellulose, fiberglass batts, spray foam and structural insulated panels, the R-value notes, the removal cost, the federal tax credit terms, and the footnote attributing cost data to contractor estimates used by Angi)
  2. Fixr, How Much Does Insulation Installation Cost?, updated January 29, 2026 (the $0.50 to $2.30 per square foot attic figure, the blown-in figure, and the wall, garage and rigid foam board rates)

Price figures are national US ranges from the sources above as of the date shown. Your local price depends on labor rates, permits and site conditions. Read how we get our numbers.