Septic
Installation, pumping and inspection, with the published tables checked row by row against each other instead of averaged together.
This section opened on 18 November 2026. It works the way the rest of the site does: every figure names the guide it came from and the date that guide was updated, and where sources disagree we show the disagreement instead of splitting the difference.
One thing runs through all three pages. On this subject the two main publishers are often printing the same numbers, and the places where they stop matching are the places worth your attention. We found that by comparing their tables row by row rather than comparing their headlines, and it changes what the pages are able to tell you.
The questions so far
| Page | The short answer | What it adds |
|---|---|---|
| Septic tank pumping cost | $400 by one guide, $420 by the other | four of five table rows identical to the dollar, and the one that differs is the most common tank size |
| Septic tank installation cost | $4,500 to $9,000 by one guide, $3,480 to $11,625 by the other | three of eight system types priced identically, labelled materials only in one table and average cost in the other |
| Septic inspection cost | it depends which of four jobs you mean, and the cheapest figure published is $100 while the dearest is $1,180 | six published figures from two publishers, no two alike, each attached to a different scope |
What we found doing this
Row by row beats headline against headline. On pumping, the two headline ranges look like an ordinary small disagreement, $300 to $600 against $290 to $560. The tables underneath tell a different story: 750, 1,000, 1,500 and 1,750 gallons are identical to the dollar in both, and only the 1,250 gallon row differs. This Old House names Angi as the source of its table. Fixr names no publisher. So the agreement is not confirmation, and the single disagreement sits exactly on the size Fixr calls the most common in the US.
A heading can be worth more than the number under it. On installation, aerobic, mound and evapotranspiration systems carry the same figures in both guides. Fixr's column says materials only and the page says the costs do not include installation. This Old House's column says average cost. The same page that says average cost also says labor is 50% to 70% of the total, which the identical figures cannot both satisfy. We could not resolve it from the two pages, so we say so and tell readers to make any quote state which it is.
And one word can cover four jobs. The lowest inspection figure either publisher prints is $100, at Fixr, and the highest is $1,180, at This Old House. Sorted by what each page says is being inspected, the spread turns into four distinct services at sensible prices. That one is less a finding about the publishers than about the question.
Where the numbers come from
Two publishers carry this section, and only one of them says where its figures originate. This Old House names Angi, both in the footnote on its installation guide and directly under the pumping table. Fixr states that it gathers figures from pricing databases, licensed contractors and industry experts, and names no individual publisher.
That matters more here than usual, because of how often the two tables match. Where eight of ten table endpoints are identical and one publisher names its upstream, a reader should treat the match as one source seen twice.
Neither publisher has a page devoted to septic inspection, so every inspection figure on this site comes from a section inside a page about installation, repair, cleaning or pumping. We name the page each figure came from.
What connects this to the rest of the site
Septic work is a drainage problem before it is a tank problem. Our foundations section covers the water that collects around a house, including French drains and sump pumps, which deal with the same ground conditions a percolation test measures. Our water treatment section covers the other half of a house that is off the mains.
Questions answered
- How much does a septic inspection cost?Updated 2026-11-18Fixr (updated January 31, 2025) prints three different inspection ranges on three of its own pages, $100 to $300 for a standalone inspection, $300 to $600 when buying a home and $100 to $900 for an annual check. This Old House prints $250 to $1,180 for a three year system check and $250 to $500 for a camera inspection (updated May 22, 2026), and about $550 for a professional inspection (updated June 10, 2026). The word inspection is covering at least four different jobs, and the price tells you which one you are buying.
- How much does septic tank installation cost?Updated 2026-11-18Fixr (updated January 31, 2025) puts septic tank installation at $4,500 to $9,000 with a national average of $6,100, a $3,000 low case and a $22,500 high case. This Old House (updated March 12, 2026) puts it at $3,480 to $11,625 and says complex systems can exceed $23,000, with its data sourced from Angi. Their tables by system type agree exactly on the three most expensive types, which matters because one table excludes installation and the other does not.
- How much does septic tank pumping cost?Updated 2026-11-18Fixr (updated January 31, 2025) puts septic tank cleaning at $300 to $600 with a national average of $400, and its table by tank size runs from $175 to $700. This Old House (updated May 22, 2026) puts pumping at $290 to $560 with an average of $420, and prints a table by tank size that it says came from Angi. Four of the five rows in those two tables are identical to the dollar. The exception is the 1,250 gallon row, which is the size Fixr calls the most common in the US.