HonestHomeCost
Foundations

How much does a French drain cost?

Short answer

Fixr (updated January 31, 2025) puts a French drain at $2,800 to $6,500 with a national average of $5,000, and separately describes a $500 low case and an $18,000 high case. Bob Vila (updated June 27, 2024) prints $500 to $18,000 as the typical range with the same $5,000 average, attributed to Angi and HomeAdvisor. The useful figure is not the total but the rate: Fixr gives an interior drain an average of $50 per linear foot, Bob Vila puts a basement drain at $60 to $70, and exterior work is roughly half that in both.

$5,000
National average, the same figure in both guides (Fixr, Bob Vila)
$2,800 to $6,500
The range described as typical (Fixr)
$500 to $18,000
The range printed as typical, which is Fixr's low and high case (Bob Vila)
$50 per linear foot
Average for an interior basement drain (Fixr)

The same average, two very different ranges

Source Average Printed as the typical range Updated
Fixr $5,000 $2,800 to $6,500 January 31, 2025
Bob Vila $5,000 $500 to $18,000 June 27, 2024

Read side by side, Bob Vila looks like a second opinion that happens to be far less confident. It is not. Fixr prints $2,800 to $6,500 as its national average range, and then describes two scenarios: a low of $500 for a 50 linear foot drain in an exterior location, and a high of $18,000 for an extensive 100 linear foot perimeter drain to stop basement flooding.

Bob Vila prints exactly those two endpoints, $500 and $18,000, as the range a homeowner should expect, and attributes them to Angi and HomeAdvisor. Its own source list on the page names Angi, HomeAdvisor, Fixr, HomeGuide and LawnStarter.

Our arithmetic, marked as ours. Fixr's typical band is $3,700 wide. The band Bob Vila prints is $17,500 wide, which is 4.73 times as wide, from the same average and, on Bob Vila's own account, overlapping sources.

This is the second topic in this section where the pattern appears, the first being our sump pump page, where This Old House prints Fixr's $500 and $4,000 scenarios as the typical range and says in a footnote that its data came from Fixr. It is worth treating as a habit of the genre rather than a one-off.

Price it by the foot, because that is how it is built

A French drain is a trench. Its cost follows its length and what has to be cut through to dig it, which is why both publishers give rates as well as totals.

Where Rate per linear foot Source
Interior, average $50 Fixr
Interior, range $40 to $100 Fixr
Exterior, average $25 Fixr
Exterior, range $10 to $100 Fixr
Shallow exterior $10 to $50 Fixr
Exterior footing drain $80 to $100 Fixr
Basement $60 to $70 Bob Vila
Around the house $50 to $80 Bob Vila
Yard $20 to $40 Bob Vila
Crawl space $25 to $35 Bob Vila

Here the two publishers genuinely differ, and the gap is small enough to be informative. Fixr's average for an interior drain, $50 per linear foot, sits below the bottom of Bob Vila's basement band of $60 to $70. Both describe the same job: breaking the concrete floor, laying pipe in gravel, covering it again.

Our reading. A rate disagreement of this size is what two independent estimates of one trade normally look like. It is a useful contrast with the totals above, where the agreement was exact because the numbers came from the same place.

What the rate includes

Fixr splits the interior rate: of the $50 per linear foot, labour is $35 to $40, and material is the rest. Over 100 linear feet that puts labour at $3,500 to $4,000 and the installation at $5,000 to $6,000, which is Fixr's own arithmetic on its own page rather than ours. Exterior work it puts at about $35 per linear foot, with labour of $20 to $25.

Bob Vila prices the materials directly: pea gravel $500 to $1,000, perforated pipe $50 to $200, and the pipe itself at $0.50 to $3 per linear foot. It puts labour at $50 to $100 per hour and a permit at $50 to $100.

Our reading. Both accounts agree on the shape even where the rates differ: this is a labour job with cheap materials, and the thing you are paying for is excavation. That is why interior work costs roughly twice exterior work. Concrete has to come up and go back down.

How to read a French drain quote

Our view, marked as ours, drawn from the figures above.

  • Ask for the price per linear foot and the length, not the total. A total without a length is the same incomplete number we found on our basement waterproofing page.
  • Establish interior or exterior first. It is roughly a factor of two in both guides.
  • A quote near $500 is a short exterior run, on Fixr's own description 50 feet of shallow trench.
  • A quote near $18,000 is a full perimeter system against active flooding, not a drainage improvement.
  • Check whether a sump pump is included. Fixr prices a combined drain and pump at $65 to $75 per linear foot, and Bob Vila adds a pump at $150 to $300 to install.
  • If a pump is already there, the drain may outlive it twice over, which our sump pump replacement page puts numbers to.

What to take from this

  1. $5,000 is one average, printed by both, and Bob Vila attributes its figures to Angi and HomeAdvisor.
  2. $500 to $18,000 is not a typical range. It is Fixr's 50-foot exterior case and its 100-foot flooding case.
  3. $2,800 to $6,500 is the band actually described as typical.
  4. Interior work is about twice exterior work, and that is the first question to settle.
  5. The rates disagree where the totals did not, $50 against $60 to $70 per foot for the same basement job, which is what independent estimates look like.

A drain moves water that the ground will not take. If your property is also on a septic system, the same soil drainage decides what that system can do, and the test for it is priced on our septic tank installation page.

Sources

  1. Fixr, French Drain Installation Cost, updated January 31, 2025 (the $2,800 to $6,500 range, the $5,000 average, the $500 and $18,000 scenarios with their stated lengths, and the per linear foot figures for interior, exterior, shallow and footing drains)
  2. Bob Vila, French Drain Cost, updated June 27, 2024 (the $500 to $18,000 range and $5,000 average attributed to Angi and HomeAdvisor, the per linear foot table by location, and the material and labour figures)

Price figures are national US ranges from the sources above as of the date shown. Your local price depends on labor rates, permits and site conditions. Read how we get our numbers.