Two ranges that are closer than they look
| Source | Average | Printed as the typical range | Attributed to | Updated |
|---|---|---|---|---|
| Fixr | $500 | $450 to $800 | not stated | January 31, 2025 |
| Bob Vila | $656 | $299 to $1,014 | Angi and HomeAdvisor | June 7, 2024 |
Fixr's band is narrow and its average sits near the bottom of it. Bob Vila's is nearly twice as wide. Read as two independent opinions, that would say the trade is less predictable than Fixr thinks.
Look at what the ends are, though. Fixr separately defines its low cost as $300, for a 1,000 square foot home, one sample and laboratory testing, and its high cost as $1,000, for a larger home, two samples, laboratory testing and drywall removal for testing purposes. Those two figures, $300 and $1,000, are the two ends of Bob Vila's own table row for a mold inspection.
Our reading, and we are being careful here. Bob Vila's headline $299 and $1,014 carry the odd precision that upstream estimator data usually has, and Bob Vila attributes them to Angi and HomeAdvisor rather than to Fixr. So we cannot say it took them from Fixr. What we can say is that Fixr's two numbers describe specific jobs, and Bob Vila's near-identical pair is presented as what a homeowner should expect. Our arithmetic: the two pairs differ by $1 at the bottom and $14 at the top. Bob Vila's article source list names HomeAdvisor, Angi, Fixr.
What you are actually buying
The price is set by the size of the home and the number of samples, and both guides say so.
| What | Figure | Source |
|---|---|---|
| Inspection, whole house | $300 to $1,000 | Bob Vila |
| Each additional sample | $60 to $80 | Fixr |
| Mold testing as a line item | $250 to $500 | Bob Vila |
| Swab test | $200 to $300 | Bob Vila |
| Air cell test | $250 to $350 | Bob Vila |
| Testing, home over 4,000 square feet | $700 to $1,000 | Bob Vila |
| Testing, smaller home | $300 to $400 | Bob Vila |
Bob Vila puts a basic inspection at about 2 hours and a detailed inspection of a whole structure at up to 6 hours.
Our reading, marked as ours. Two quotes for a mold inspection can differ by three times and both be honest, because one is a walk-through with a single sample and the other is a multi-point air test with drywall opened. Ask how many samples, whether they go to a laboratory, and whether anything gets opened up. That is the entire price.
The number on the inspection page that contradicts the remediation page
Bob Vila's inspection page carries a table putting mold remediation at $1,150 to $3,400. Its own dedicated remediation page, which we use on our mold remediation page, gives $1,125 to $3,439.
Our reading. The difference is small and makes no practical difference to anyone. We mention it because it is the clearest possible illustration of a habit worth knowing about: the same publisher's number changes slightly depending on which of its pages you land on, and neither page tells you the other exists. If you are comparing a quote against "what the internet says", you are comparing it against whichever page you happened to open.
Whether you need one at all
This is the question the price does not answer, and the guides are more useful here than their averages are.
Bob Vila describes the inspection as the step that makes the testing that follows targeted, and says the initial outlay will most likely save money in the long run. Fixr prices the inspection as a standalone service with laboratory analysis attached.
Our view, marked as ours, drawn from the figures rather than from either publisher. An inspection is worth its price when you cannot see the mold, when you need a written result for insurance or a sale, or when a remediation quote is large enough that you want the scope established by someone who is not selling the removal. Where the mold is visible, in a bathroom or on a basement wall, you are paying several hundred dollars to confirm what you can already see, and that money may be better spent on finding the moisture.
On this site the moisture is usually the real question: our basement waterproofing page covers water against the wall, our slab leak page covers water under the floor, and our French drain page covers moving it away before it gets in.
What to take from this
- $500 and $656 are the two published averages, from differently stated sources.
- Fixr's $300 and $1,000 are defined jobs, not a range, and they bracket Bob Vila's printed range almost exactly.
- Samples and home size set the price. Extra samples are $60 to $80 each.
- Bob Vila's own two pages disagree slightly on what remediation costs, which is worth knowing before you quote any single page at a contractor.
- Visible mold rarely needs testing. Pay for a diagnosis of the water instead.
Sources
- Fixr, Mold Inspection Cost, updated January 31, 2025 (the $450 to $800 range and $500 average with its stated scope, the $300 low case and $1,000 high case with their stated home sizes and sample counts, and the per-sample price)
- Bob Vila, Mold Inspection Cost, updated June 7, 2024 (the $299 to $1,014 range and $656 average attributed to Angi and HomeAdvisor, the inspection, testing and remediation table, the test-type prices, and the article source list naming HomeAdvisor, Angi and Fixr)
- Bob Vila, Mold Remediation Cost Guide, updated April 17, 2024 (cited on this page only for its $1,125 to $3,439 remediation range, which differs from the figure on the same publisher's inspection page)
Price figures are national US ranges from the sources above as of the date shown. Your local price depends on labor rates, permits and site conditions. Read how we get our numbers.