Two sets of numbers that do not match, which is a good sign
| Source | Average | Printed as the typical range | Updated |
|---|---|---|---|
| This Old House | $2,300 | $630 to $4,400 or more | April 7, 2026 |
| Fixr | $2,500 | $1,000 to $4,000 | May 1, 2025 |
Our arithmetic, marked as ours. The averages differ by $200, which is 8.7% of the lower figure. The bottoms differ by $370 and the tops by $400.
That sounds like a small thing, and on this site it is not. Elsewhere in this section we have found two guides agreeing to the dollar because one took its figures from the other, which our sump pump page and our French drain page both document with the publisher saying so. Here the numbers are close but not copied, and the attributions differ: This Old House says its data came from HomeAdvisor, Fixr names pricing databases, licensed contractors and industry experts. Two estimates of the same trade landing within nine percent by different routes is worth more than two landing on the same digit by one route.
The headline range leaves out the expensive repair
Both publishers put the same ceiling on the one job that can run away with the budget.
| Type of work | This Old House | Fixr |
|---|---|---|
| Leak detection | $150 to $600 | $100 to $400 |
| Broken pipe under the slab | $200 to $2,000 | $200 to $2,000 |
| Patching the slab | not priced separately | $250 to $800 |
| Breaking the slab | not priced separately | $500 to $3,000 |
| Tunnelling under the house | not priced separately | $900 to $2,000 |
| Rerouting the plumbing | $1,500 to $15,000 | $4,000 to $15,000 |
| Full slab replacement | $3,600 to $8,000 | $4,000 to $8,000 |
Our arithmetic, marked as ours. The top of the rerouting band is $15,000 on both tables. The top of the This Old House headline range is $4,400, so its own table reaches 3.41 times higher than the range it prints at the top of the page.
Fixr handles this openly: it states $15,000 as the high cost, defined as completely rerouting all pipes from under the slab to the attic, and keeps it outside the $1,000 to $4,000 band. This Old House prints $630 to $4,400 or more, and the words that carry the weight are "or more".
Our reading. The average answers a narrow question: what it costs to locate one leak and fix it. It does not answer the question people usually arrive with, which is what happens if the pipe run under the slab is failing rather than leaking in one spot. That is a different repair with a different ceiling.
What decides which repair you get
Fixr sets out the access methods and prices them, which is the clearest way to see where the money goes. Reaching a pipe under a slab means breaking the slab at $500 to $3,000, or tunnelling under the house at $900 to $2,000, or lining the pipe from inside at $500 to $2,000 where that is possible. Afterwards the concrete has to be made good, patching at $250 to $800, and a water-damaged subfloor replaced at $500 to $1,000.
Fixr puts plumbers at $45 to $200 per hour with most people paying $75 to $130, an inspection at one to three hours, and the repair itself at anywhere from two hours to three days, giving labour of $90 to $4,800.
Our reading, marked as ours. Two of those numbers together explain the whole spread. Access can cost more than the plumbing, and the repair can take two hours or three days. The pipe is rarely the expensive part.
A note on where the headline figures sit
The three figures This Old House prints as low, average and high, $630, $2,300 and $4,400, appear inside a lead form that submits your details to All Star Pros, its advertising partner. The page's footnote attributes the cost data to HomeAdvisor. We say so for the same reason we say it elsewhere: a figure published next to a quote request is not wrong, but you should know what the panel it sits in is for.
How to read a slab leak quote
Our view, marked as ours, drawn from the figures above.
- Pay for detection as its own line. This Old House puts it at $150 to $600 and Fixr at $100 to $400, and it decides everything that follows.
- Ask how the plumber will reach the pipe, breaking, tunnelling or lining. That is the cost, not the fix.
- A quote near either published average, $2,300 or $2,500, is a single leak repaired. That is what each average describes, and they are two separate figures rather than the ends of one range.
- A quote in five figures is rerouting, and it should be presented as abandoning the under-slab run, not as a repair.
- Ask what happens to the floor. Patching, subfloor and finished flooring are separate from the plumbing in Fixr's breakdown and often missing from a headline total.
- If replacement comes up, the rate for pouring new concrete is on our concrete slab page, and it depends on whether the slab carries the house.
Water under a slab is the same question as water against a foundation from the other side, which is our basement waterproofing page, and if the slab itself has moved rather than leaked, our foundation repair page covers that.
What to take from this
- $2,300 and $2,500 are the two published averages, $200 apart, from different stated sources.
- Both tables top out at $15,000 for rerouting, more than three times the printed range.
- Detection comes first and is cheap relative to everything after it.
- Access is the cost: breaking, tunnelling or lining, then making the concrete and floor good.
- Disagreement at nine percent is reassuring. On this subject, exact agreement has usually meant one source quoted twice.
A leak that went unnoticed for a while brings a second bill with it. Mold remediation is priced per square foot, and whether to pay for a mold inspection first is a separate question with its own answer.
Sources
- This Old House, How Much Does Slab Leak Repair Cost? (2026 Guide), updated April 7, 2026 (the $2,300 average and $630 to $4,400 range, the cost by type of work table, and the footnote attributing the data to HomeAdvisor)
- Fixr, Slab Leak Repair Cost, updated May 1, 2025 (the $1,000 to $4,000 range and $2,500 average, the $600 low case and $15,000 high case, and the per-method figures for detection, patching, tunnelling, slab breaking, rerouting and replacement, plus plumber hourly rates)
Price figures are national US ranges from the sources above as of the date shown. Your local price depends on labor rates, permits and site conditions. Read how we get our numbers.