Two jobs, one quote
This is the thing to settle before any number means anything.
| Job | Cost | Source |
|---|---|---|
| Insulating a crawl space | $500 to $6,000, average $2,000 | Fixr |
| Encapsulating a crawl space | $3 to $7 per square foot, $1,500 to $15,000, average $5,500 | This Old House |
Insulation slows heat moving through the floor above. Encapsulation seals the space off from the ground and the outside air with a vapor barrier, sealed vents and usually a dehumidifier, and it includes insulation as one component.
Our reading. A contractor quoting "crawl space insulation" may be quoting either, and the published averages differ by more than double. The question that separates them is simple: is a vapor barrier included, and are the vents being sealed? If yes, you are buying encapsulation and should price it against the $3 to $7 per square foot figure, not against $2,000.
We ran into the mirror image of this in our basement waterproofing page, where three publishers looked threefold apart until we asked what area each was pricing. Here the gap is not area, it is scope.
What the insulation itself costs
All three material rates are This Old House figures for a crawl space:
| Material | Cost per square foot |
|---|---|
| Fiberglass batt | $0.60 to $1.10 |
| Spray foam | $1 to $3.50 |
| Rigid foam board | $2.50 to $3 |
A wording to ignore on that page. This Old House introduces spray foam as "more affordable" than fiberglass batt. Its own figures have spray foam at $1 to $3.50 against batt at $0.60 to $1.10, so spray foam is dearer at both ends. The table is right and the sentence is not. The same publisher makes the same kind of slip on its spray foam guide, where the body text puts open-cell at or above closed-cell while its own table has open-cell cheaper at every thickness, which our spray foam page sets out with a third publisher agreeing.
This Old House also gives the one caveat that should decide the material in a damp crawl space: fiberglass batt is usually not recommended for high-humidity environments because it can harbor mold and mildew, and rigid foam board is the most durable and easiest to work with but typically the most expensive.
What Fixr's three figures actually describe
Each is a defined job rather than a price point, and the definitions do the work:
- $2,000 average: spray foam in an 800 square foot crawl space.
- $300 low: a small 300 square foot crawl space with batt insulation.
- $10,000 high: a large 1,500 square foot space with spray foam in the walls and subfloor plus a vapor barrier.
Our reading, marked as ours. Notice that the high case includes a vapor barrier, which is an encapsulation component. So even inside one publisher's page the two jobs blur at the top end, and that is exactly where the money is.
The costs that sit around the job
All This Old House figures, from the encapsulation guide:
| Item | Cost |
|---|---|
| Vapor barrier, 4 mil | $0.05 to $0.20 per square foot |
| Vapor barrier, 20 mil | $0.40 to $0.60 per square foot |
| Waterproof tape for the seams | $18 to $50 per roll |
| Sealing a vent | $10 to $22 per vent |
| Crawl space access door | $60 to $150 |
| Permit | $100 to $250 |
| Repairs to a moderate foundation problem, if needed first | $2,000 to $7,000 |
It also puts labour at 50% to 70% of the total, which is $2,250 to $10,500 for a 1,500 square foot home, and notes that work in a crawl space usually requires a permit.
Our view, marked as ours. The vapor barrier is the cheapest line on that list and the one that changes what the job is called. At $0.05 to $0.60 per square foot it is a small part of the bill and a large part of the scope, which is why "insulation" and "encapsulation" end up on the same invoice so often.
How to price your own crawl space
Our view, marked as ours, drawn from the figures above.
- Measure the floor area. Every usable figure here is per square foot.
- Decide insulation or encapsulation before collecting quotes, and say which when you ask.
- In a damp space, skip fiberglass batt. The publisher that prices it cheapest also advises against it there.
- Ask whether a permit and a dehumidifier are in the quote. The permit is $100 to $250 and usually required.
- Check for repairs first. A foundation problem found mid-job is $2,000 to $7,000 and will not be in the original price.
Where the crawl space is wet rather than cold, the question moves to our foundations section, and the moisture itself is usually cheaper to fix than to insulate around.
What to take from this
- $2,000 insulates, $5,500 encapsulates. They are different jobs.
- A vapor barrier in the quote means encapsulation, whatever the quote is titled.
- Fiberglass batt is cheapest at $0.60 to $1.10 and the wrong choice in a damp space.
- Labour is 50% to 70% of an encapsulation project.
- Ask about the permit, which is usually needed and is $100 to $250.
Sources
- Fixr, Crawl Space Insulation Cost, updated August 29, 2025 (the $500 to $6,000 range and $2,000 national average with its stated scope, and the $300 low case and $10,000 high case with their stated areas and materials)
- This Old House, How Much Does Crawl Space Encapsulation Cost?, updated March 13, 2026 (the per square foot material rates for fiberglass batt, spray foam and rigid foam board in a crawl space, the $3 to $7 encapsulation rate and $1,500 to $15,000 range, the labour share, and the vapor barrier, vent sealing and permit figures)
Price figures are national US ranges from the sources above as of the date shown. Your local price depends on labor rates, permits and site conditions. Read how we get our numbers.